The Use of Coilovers In Every Case


Many motorists do not realize the state of the suspensions of their car until they begin to behave abnormally. For example, when the vehicle makes strange noises, such as snapping or popping noises under the chassis when riding on bumps, if you feel that your car is not driving straight while you are trying to correct its trajectory permanently, then your direction surely needs to be checked. These are just two symptoms of the failure of your suspension system among many others. These anomalies lead you to inspect the suspension system of your car. With the use of the you can know it all.

How to check your suspension?

When servicing and flushing, it is common to have your tires and the suspension of your car inspected by a mechanic. Inspecting your suspension yourself is not obvious especially if you do not know anything about mechanics or if you are a beginner, because you do not have the necessary experiences to be able to diagnose a problem of suspension. If you know enough about your car, in this case you may be able to identify the source of the fault yourself.

How to control your suspension system?

Tools needed: a lamp, a jack, a candle.

1st step:

Take your car for a test drive

Do your best to eliminate all kinds of distractions and noises during this test. Lower the windows of your car and try to make note of all the noises you hear from your vehicle. If you happen to hear a noise, pay attention to where the sound comes from, from the front or the back of the vehicle. Note that noise is uniform or noise depends on your driving, such as driving on a retarder or while cornering.

Step 2:

Check the outside of the vehicle

Once you have identified where the noise is coming from during the test, turn the vehicle off (with handbrake). Be sure to let the car cool for at least 30 minutes before starting. This will prevent you from getting burned during the inspection. Put on a pair of gloves and use a lamp to see more clearly.

Step 3:

Bounce the car

Place your hands firmly on the car, at the intersection of the wings and hood. Push down firmly on the vehicle suspension and let go to allow your car to “bounce back”. If you observe that the car is rebounding and stabilizing, it is a sign that the absorption of the shocks shock is still good. If the car continues to bounce up and down, it is a sign of fatigue indicating that some parts of your suspension system need to be replaced. Try this method on all four corners of the vehicle to check one by one each damper.